Quality Assurance/InspectionRequest a Quote

1 Zeiss Contura G2 RDS 700 Coordinate Measuring
Machine
Measuring Range: 28” x 28” x 23”

1 Fowler/Sylvac Trimos V Plus Height Check System
Range 0″ – 24″, 0.00001 Resolution

1 OGP Top Bench Optical Comparator

2 OGP Smartscope Flash 500 Optical Measuring Scope,
Measuring range: 20 x 18 x 8”

1 Jones & Lamson Optical Comparator,

14” Ø Screen with 0.0001” Resolution

1 Fowler/Sylvac Z-Cal Height Check System
Range: 0” – 12”, 0.000050 Resolution

1 Pratt & Whitney, Model C, Super Micrometer Gauging
System, Range: 0” – 8”, 0.00002” Resolution

1 Starrett Super Precision Bench Micrometer,
Range: 0” – 2”, 0.000005” Resolution

1 Starrett Electronic/Digital Height Check,
Range: 0” – 12”, 0.00001” Resolution

4 Brown & Sharpe Height Gage, Range:0” – 12”

3 Wilson Rockwell Surface Hardness Tester,
Scales Installed: B, C, & N (Others Possible)

10 Starrett Granite Surface Plates, Sizes:
36” X 48” to 72” X 144”, Grade A or better

1 Bendix Profilometer System Surface Gage,
Roughness & Peak measurement to 1u in.

1 Mitutoyo SJ-201 Surface Profilometer

2 Federal Pocketsurf Surface Gage,
Roughness & Peak measurement to 6u in.

1 Starrett Micrometer Set, Range: 0” – 34”

1 Starrett Vernier Caliper Set, Range: 0” – 48”

1 Starrett InterMike Bore Gage Set, Range:
Ø 0.25” – 4.0”, 0.0005 Resolution

2 Standard Dial Bore Gage Set, Range:
Ø 6” – 30”, 0.0005” Resolution

2 Interapid Dial Bore Gage Set, Range:
Ø 0.5” – 6.0”, 0.0005 Resolution

1 Fowler Tri-Point Bore Micrometer Set, Range:
Ø 0.75” – 6.00”, 0.0005 Resolution

6 Meijer Plug Gage Set, Range: Ø 0.010” – 0.750”, Increments of 0.001”, Plus & Minus Tolerance(s)

1 Starrett Screw Thread Micrometer

1 Gaertner Scientific Toolmakers Microscope

1 Adjustable Range Johnson Gage Company Thread Comparator

1 Mitutoyo Toolmakers Microscope

* With Mitutoyo Digital Readout(s)

** All QC equipment is annually inspected and calibrated.
Inspection procedures governed by
ISO 10012-1

*** CTM Quality Manual available upon request.